Inline ultrasonic water meters family line illustration — Illustrative family drawing · actual WM13 configuration may differ

SANT / Inline ultrasonic water meters

WM13

Name: SANT WM13
Brand: SANT

Ultrasonic water, flanged; 50-300 mm

Battery-operated meter, PN16, IP68, Class-B as labelled, RS485 with external 24 VDC

Enquire about this model ↗Compare model

Supply from Hyderabad · India-wide delivery
Configuration, availability and commercial terms confirmed on quotation.

MODEL OVERVIEW

What the WM13 offers

Battery-operated meter, PN16, IP68, Class-B as labelled, RS485 with external 24 VDC
flange specification differs between lists

Manufacturer’s documented description: SANT retail price list, August 2026, pp. 63–66. Options and qualifications above are retained as stated.

Check these document differences

Power and flange configuration

SANT April 2026 Watertech p.5: battery label; Class150 flange wording

SANT August 2026 retail p.66: RS485 requires external 24 VDC; PN16 wording. Confirm actual drilling and output power

Request written confirmation for the offered size and configuration before using either value.

TECHNICAL DATA

WM13 specifications

Parameter	Documented value
Measuring principle	ultrasonic inlineSANT retail price list, August 2026, 63–66
Nominal diameter (DN)	50, 65, 80, 100, 125, 150, 200, 250, 300S20 · 66
Connections	PN16 flanged in retail sheetS20 · 66
Sensor protection	IP68S20 · 66
Power supply	Battery-operated meter; external 24 VDC for outputS20 · 66
Included outputs	RS485 Modbus; requires external 24 VDCS20 · 66
Pressure designation	PN16S20 · 66
Standards claim	Class B as printedS20 · 66

Details to confirm for the offered configuration

These parameters are not established as exact-model values in this record. Some may not apply to this technology.

Q1 m3 h
Q2 m3 h
Q3 m3 h
Q4 m3 h
Working pressure and temperature
Approvals and scope

DUTY & SELECTION

Where to consider this type

The guidance below explains the technology. It does not extend this model’s documented service limits.

Sensors compare sound travel in different directions through the water. The difference is used to calculate flow. Inline versions have a defined measuring body.

Full inline ultrasonic water meters guide ↗

Installation and commissioning

Before the meter is selected

Fluid acoustic conditions and bubbles
Approved Q values and orientation
Battery-life assumptions and power for outputs
Forward/reverse total treatment and data availability

Before the system is handed over

Confirm the installation drawing, orientation and access for service.
Match the actual flow range and permitted pressure loss to the project.
Record meter serial number, start reading and any output scaling.
Commission communications against the receiving system and retain the test record.

Read the installation guide ↗

Reading and communication

Documentation mentions: RS485. These may be optional or specific to a variant.

Discovery tags come from the documented description, including optional capabilities. Confirm inclusion and exact size/configuration.

A connected metering system is five parts: meter → interface or module → network or gateway → software → billing, dashboard or control system. A quotation should name who supplies and maintains each one. AMR-ready equipment may still require separately quoted radio, gateway, head-end and billing software.

Understand pulse, wired and wireless reading ↗

Documents and purchase checks

Read the SANT technical reference → · Browse the source index

Source: SANT retail price list, August 2026, pp. 63–66. Reviewed 2026-09-09.

Download product data (JSON)Request current drawing / datasheet ↗

Ask for these before ordering

Approved drawing for the exact model, size and configuration
Serial-number calibration or factory test record
Applicable approval certificate and exact scope
Installation manual and required straight pipe
Protocol/register map and output power requirements
Option/accessory codes with included components
Pressure-loss curve, flange drilling and face-to-face length
Current written commercial and warranty terms

SPECIFY YOUR REQUIREMENT

Get a quotation for WM13

Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.

Price and lead time are quoted for the selected size and configuration.