MODEL OVERVIEW
What the FM36 offers
- Device plus online portal
- 220 VAC, RS485, ±0.5%
- cloud/SIM annual subscription on request
- board-compliance claims require project-specific verification
Manufacturer’s documented description: Fedrel product and price list, effective 20 January 2026, pp. 8–10. Options and qualifications above are retained as stated.
Check these document differences
Document editions
Fedrel FM15 catalogue, revision 2022, pp.2–3: size, pressure and power/output options
Fedrel effective 20 January 2026 list pp.8–10: separate integral, remote, battery and telemetry configurations. Obtain exact-configuration drawing; do not combine all options
Request written confirmation for the offered size and configuration before using either value.
TECHNICAL DATA
FM36 specifications
| Parameter | Documented value |
|---|---|
| Measuring principle | electromagneticFedrel product and price list, effective 20 January 2026, 8–10 |
| Installation style | IntegralS17 · 11 |
| Nominal diameter (DN) | 15, 20, 25, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 400S17 · 11 |
| Accuracy statement | ±0.5% as printed; basis not stated in this blockS17 · 11 |
| Fluid temperature | −20 to 150°C family block; exact liner limit must be confirmedS17 · 11 |
| Wetted materials | SS316L electrode; PTFE / hard-rubber liner optionsS17 · 11 |
| Connections | ASME B16.5 Class150 flangesS17 · 11 |
| Power supply | 220 VACS17 · 11 |
| Included outputs | RS485 Modbus RTUS17 · 11 |
| Approvals and scope | CGWA/PWRDA/CPCB/HWRA compliance claimed by list; exact project acceptance not independently verifiedS17 · 11 |
| Included accessories | Telemetry device and online monitoring portalS17 · 11 |
| Recurring costs | Annual cloud/SIM subscription quoted separatelyS17 · 11 |
| Body material | SS304 flow tube; carbon-steel flange/coil housingS17 · 11 |
| Pressure designation | PN16S17 · 11 |
Details to confirm for the offered configuration
These parameters are not established as exact-model values in this record. Some may not apply to this technology.
- Q1 m3 h
- Q2 m3 h
- Q3 m3 h
- Q4 m3 h
- Working pressure and temperature
DUTY & SELECTION
Where to consider this type
An electromagnetic meter, often called a mag meter or EMF meter, measures flow using the electrical signal induced when a conductive liquid moves through a magnetic field.
Installation and commissioning
Before the meter is selected
- Lowest measured conductivity
- Liner, electrode and seal compatibility
- Full measuring tube, grounding and pipe profile
- Integral/remote configuration, accuracy basis and simultaneous powered outputs
Before the system is handed over
- Confirm the installation drawing, orientation and access for service.
- Match the actual flow range and permitted pressure loss to the project.
- Record meter serial number, start reading and any output scaling.
- Commission communications against the receiving system and retain the test record.
Reading and communication
Documentation mentions: RS485, Cellular telemetry. These may be optional or specific to a variant.
Discovery tags come from the documented description, including optional capabilities. Confirm inclusion and exact size/configuration.
A connected metering system is five parts: meter → interface or module → network or gateway → software → billing, dashboard or control system. A quotation should name who supplies and maintains each one. AMR-ready equipment may still require separately quoted radio, gateway, head-end and billing software.
Understand pulse, wired and wireless reading ↗Documents and purchase checks
Read the Fedrel technical reference → · Browse the source index
Source: Fedrel product and price list, effective 20 January 2026, pp. 8–10. Reviewed 2026-09-09.
Ask for these before ordering
- Approved drawing for the exact model, size and configuration
- Serial-number calibration or factory test record
- Applicable approval certificate and exact scope
- Installation manual and required straight pipe
- Protocol/register map and output power requirements
- Option/accessory codes with included components
- Pressure-loss curve, flange drilling and face-to-face length
- Current written commercial and warranty terms
SPECIFY YOUR REQUIREMENT
Get a quotation for FM36
Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.
Compare related models
Similar technology does not mean equivalent performance. Compare exact configurations.