SANT / Turbine, vortex and process flow meters
WM10
Vortex steam meter; 15-200 mm
SS304, piezo sensor, PN20 steam, 250°C, 12-30 VDC, 4-20 mA/RS485
MODEL OVERVIEW
What the WM10 offers
- SS304, piezo sensor, PN20 steam, 250°C, 12-30 VDC, 4-20 mA/RS485
- steam table on request
Manufacturer’s documented description: SANT retail price list, August 2026, pp. 63–66. Options and qualifications above are retained as stated.
TECHNICAL DATA
WM10 specifications
| Parameter | Documented value |
|---|---|
| Measuring principle | turbine vortex processSANT retail price list, August 2026, 63–66 |
| Nominal diameter (DN) | 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200S20 · 65 |
| Fluid temperature | Maximum 250°CS20 · 65 |
| Power supply | 12–30 VDCS20 · 65 |
| Included outputs | 4–20 mA / RS485S20 · 65 |
| Body material | SS304S20 · 65 |
| Pressure designation | PN20 steamS20 · 65 |
| Sensor type | Piezo sensor; steam table on requestS20 · 65 |
Details to confirm for the offered configuration
These parameters are not established as exact-model values in this record. Some may not apply to this technology.
- Q1 m3 h
- Q2 m3 h
- Q3 m3 h
- Q4 m3 h
- Working pressure and temperature
- Connections
- Approvals and scope
DUTY & SELECTION
Where to consider this type
These may be appropriate for specialist industrial duties even when they are not the usual choice for a domestic water connection.
Installation and commissioning
Before the meter is selected
- Liquid versus steam duty and fluid compatibility
- Viscosity, range, response and repeatability
- Minimum batch or process control requirement
- Pressure/temperature envelope and wetted materials
Before the system is handed over
- Confirm the installation drawing, orientation and access for service.
- Match the actual flow range and permitted pressure loss to the project.
- Record meter serial number, start reading and any output scaling.
- Commission communications against the receiving system and retain the test record.
Reading and communication
Documentation mentions: 4–20 mA, RS485. These may be optional or specific to a variant.
Discovery tags come from the documented description, including optional capabilities. Confirm inclusion and exact size/configuration.
A connected metering system is five parts: meter → interface or module → network or gateway → software → billing, dashboard or control system. A quotation should name who supplies and maintains each one. AMR-ready equipment may still require separately quoted radio, gateway, head-end and billing software.
Understand pulse, wired and wireless reading ↗Documents and purchase checks
Read the SANT technical reference → · Browse the source index
Source: SANT retail price list, August 2026, pp. 63–66. Reviewed 2026-09-09.
Ask for these before ordering
- Approved drawing for the exact model, size and configuration
- Serial-number calibration or factory test record
- Applicable approval certificate and exact scope
- Installation manual and required straight pipe
- Protocol/register map and output power requirements
- Option/accessory codes with included components
- Pressure-loss curve, flange drilling and face-to-face length
- Current written commercial and warranty terms
SPECIFY YOUR REQUIREMENT
Get a quotation for WM10
Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.
Compare related models
Similar technology does not mean equivalent performance. Compare exact configurations.
Fedrel
FM01
20-120 L/min, ±2%, 50 psig, resettable register/nonresettable total; fuel/solvent applications
Fedrel
FM04
Turbine digital oil meter; also lists water application; SS body/aluminium enclosure, 10-120 L/min, ±1%, 20 bar, 10-50°C, battery