Multijet water meters family line illustration — Illustrative family drawing · actual KAM-G configuration may differ

Kranti / AEW / Multijet water meters

KAM-G

Name: Kranti / AEW KAM-G
Brand: Kranti / AEW

ISI-marked Class-A multijet; 15-50 mm

IS 779:1994

Enquire about this model ↗Compare model

Supply from Hyderabad · India-wide delivery
Configuration, availability and commercial terms confirmed on quotation.

MODEL OVERVIEW

What the KAM-G offers

IS 779:1994
screwed ends
use its own lower-flow limits rather than substituting Class-B values

Manufacturer’s documented description: AEW/136, 11 August 2026, pp. 2–7. Options and qualifications above are retained as stated.

Check these document differences

Working pressure / temperature

Kranti Besto leaflet, undated, p.1: 10 bar / 50°C

AEW/136, 11 August 2026, p.2: 16 bar / 45°C

Request written confirmation for the offered size and configuration before using either value.

TECHNICAL DATA

KAM-G specifications

Parameter	Documented value
Measuring principle	multijetAEW/136, 11 August 2026, 2–7
Nominal diameter (DN)	15, 20, 25, 40, 50S34 · 2
Accuracy statement	±2% at Qt/Qn/Qmax; ±5% at QminS34 · 2
Accuracy basis	Legacy flow-zone error bands; not one accuracy percentage across all flow ratesS34 · 2
Fluid temperature	Maximum 45 °CS34 · 2
Working pressure and temperature	Maximum 16 bar; confirm pressure/temperature deratingS34 · 2
Connections	Screwed ends; verify exact thread and union drawingS34 · 2
Body material	Brass IS 1264 DCB2S34 · 2
Standards claim	IS 779:1994; ISI-marked Class A claimS34 · 2

Details to confirm for the offered configuration

These parameters are not established as exact-model values in this record. Some may not apply to this technology.

Q1 m3 h
Q2 m3 h
Q3 m3 h
Q4 m3 h
Approvals and scope

DUTY & SELECTION

Where to consider this type

The guidance below explains the technology. It does not extend this model’s documented service limits.

Several jets drive the impeller around its circumference. Multijet products are widely represented in domestic and small commercial catalogue ranges.

Full multijet water meters guide ↗

Installation and commissioning

Before the meter is selected

Standard and edition behind Class A/Class B wording
The exact model’s low-flow limits
Wet/dry register and magnetic coupling
Hot-water version, pulse pickup and counter scope

Before the system is handed over

Confirm the installation drawing, orientation and access for service.
Match the actual flow range and permitted pressure loss to the project.
Record meter serial number, start reading and any output scaling.
Commission communications against the receiving system and retain the test record.

Read the installation guide ↗

Reading and communication

No electronic output is established for the base record. Confirm a compatible pickup or communication variant if remote reading is required; do not assume another model’s output can be fitted.

Understand pulse, wired and wireless reading ↗

Documents and purchase checks

Read the Kranti / AEW technical reference → · Browse the source index

Source: AEW/136, 11 August 2026, pp. 2–7. Reviewed 2026-09-09.

Download product data (JSON)Request current drawing / datasheet ↗

Ask for these before ordering

Approved drawing for the exact model, size and configuration
Serial-number calibration or factory test record
Applicable approval certificate and exact scope
Installation manual and required straight pipe
Protocol/register map and output power requirements
Option/accessory codes with included components
Pressure-loss curve, flange drilling and face-to-face length
Current written commercial and warranty terms

SPECIFY YOUR REQUIREMENT

Get a quotation for KAM-G

Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.

Price and lead time are quoted for the selected size and configuration.