Fedrel
FM01
20-120 L/min, ±2%, 50 psig, resettable register/nonresettable total; fuel/solvent applications
Fedrel / Turbine, vortex and process flow meters
FM11
Digital turbine flow meter; 25/32/40/50/65/80/100/150 mm
SS304
MODEL OVERVIEW
What the FM11 offers
- SS304
- −20 to 150°C
- ±1%
- two-wire 4–20 mA
- optional +24 VDC sensor supply
- IP68 sensor/IP65 transmitter
- ASME B16.5 Class150 flanges.
Manufacturer’s documented description: S17: fedrel Feb 2026 final.pdf, Effective 20 January 2026, pp. 9. Options and qualifications above are retained as stated.
TECHNICAL DATA
FM11 specifications
| Parameter | Documented value |
|---|---|
| Measuring principle | turbine-vortex-processS17 · 9 |
| Nominal diameter (DN) | 25, 32, 40, 50, 65, 80, 100, 150S17 · 9 |
| Accuracy statement | ±1%S17 · 9 |
| Fluid temperature | −20 to 150°CS17 · 9 |
| Connections | ASME B16.5 Class150 flangedS17 · 9 |
| Sensor protection | IP68 sensorS17 · 9 |
| Transmitter protection | IP65S17 · 9 |
| Power supply | +24 VDC sensor supply described as optional; confirm loop arrangementS17 · 9 |
| Included outputs | Two-wire 4–20 mA transmitterS17 · 9 |
| Body material | SS304S17 · 9 |
Details to confirm for the offered configuration
These parameters are not established as exact-model values in this record. Some may not apply to this technology.
- Q1 m3 h
- Q2 m3 h
- Q3 m3 h
- Q4 m3 h
- Working pressure and temperature
- Approvals and scope
DUTY & SELECTION
Where to consider this type
These may be appropriate for specialist industrial duties even when they are not the usual choice for a domestic water connection.
Installation and commissioning
Before the meter is selected
- Liquid versus steam duty and fluid compatibility
- Viscosity, range, response and repeatability
- Minimum batch or process control requirement
- Pressure/temperature envelope and wetted materials
Before the system is handed over
- Confirm the installation drawing, orientation and access for service.
- Match the actual flow range and permitted pressure loss to the project.
- Record meter serial number, start reading and any output scaling.
- Commission communications against the receiving system and retain the test record.
Reading and communication
No electronic output is established for the base record. Confirm a compatible pickup or communication variant if remote reading is required; do not assume another model’s output can be fitted.
Understand pulse, wired and wireless reading ↗Documents and purchase checks
Read the Fedrel technical reference → · Browse the source index
Source: S17: fedrel Feb 2026 final.pdf, Effective 20 January 2026, pp. 9. Reviewed 2026-09-09.
Ask for these before ordering
- Approved drawing for the exact model, size and configuration
- Serial-number calibration or factory test record
- Applicable approval certificate and exact scope
- Installation manual and required straight pipe
- Protocol/register map and output power requirements
- Option/accessory codes with included components
- Pressure-loss curve, flange drilling and face-to-face length
- Current written commercial and warranty terms
SPECIFY YOUR REQUIREMENT
Get a quotation for FM11
Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.
Compare related models
Similar technology does not mean equivalent performance. Compare exact configurations.
Fedrel
FM04
Turbine digital oil meter; also lists water application; SS body/aluminium enclosure, 10-120 L/min, ±1%, 20 bar, 10-50°C, battery
Fedrel
FM06
DI, 16 bar, 10-60°C, ±1%, printed ±3% repeatability; optional 4-20 mA/pulse; not established as potable-water service