Fedrel / Woltman bulk water meters
FM03 P
Hot Woltman / pulse; 40/50/65/80/100/150/200 mm
CI FG220, Class-B, 16 bar, 0-90°C, PN16 drilling
MODEL OVERVIEW
What the FM03 P offers
- CI FG220, Class-B, 16 bar, 0-90°C, PN16 drilling
Manufacturer’s documented description: Fedrel product and price list, effective 20 January 2026, pp. 2–6. Options and qualifications above are retained as stated.
TECHNICAL DATA
FM03 P specifications
| Parameter | Documented value |
|---|---|
| Measuring principle | woltmanFedrel product and price list, effective 20 January 2026, 2–6 |
| Nominal diameter (DN) | 40, 50, 65, 80, 100, 150, 200S17 · 7 |
| Accuracy statement | Class B; ±2% at nominal flowS17 · 7 |
| Fluid temperature | 0–90°CS17 · 7 |
| Working pressure and temperature | Maximum 16 barS17 · 7 |
| Connections | BS EN1092 PN16 flange drilling; not a substitute for body working pressureS17 · 7 |
| Included outputs | Reed-switch pulse with one metre wireS17 · 7 |
| Optional outputs | Flow indicator; RS485 interface; GPRS/telemetry device on requestS17 · 7 |
| Body material | Cast iron IS210 FG220S17 · 7 |
Details to confirm for the offered configuration
These parameters are not established as exact-model values in this record. Some may not apply to this technology.
- Q1 m3 h
- Q2 m3 h
- Q3 m3 h
- Q4 m3 h
- Approvals and scope
DUTY & SELECTION
Where to consider this type
Water drives a helical rotor used for larger flows. Many ranges have flanged bodies and removable measuring inserts.
Installation and commissioning
Before the meter is selected
- Overnight flow and continuous/short peak demand
- Rotor-axis and pipe orientation requirements
- Removable insert service clearance
- Flange drilling, head loss and straight pipe
Before the system is handed over
- Confirm the installation drawing, orientation and access for service.
- Match the actual flow range and permitted pressure loss to the project.
- Record meter serial number, start reading and any output scaling.
- Commission communications against the receiving system and retain the test record.
Reading and communication
Documentation mentions: Pulse output. These may be optional or specific to a variant.
Discovery tags come from the documented description, including optional capabilities. Confirm inclusion and exact size/configuration.
A connected metering system is five parts: meter → interface or module → network or gateway → software → billing, dashboard or control system. A quotation should name who supplies and maintains each one. AMR-ready equipment may still require separately quoted radio, gateway, head-end and billing software.
Understand pulse, wired and wireless reading ↗Documents and purchase checks
Read the Fedrel technical reference → · Browse the source index
Source: Fedrel product and price list, effective 20 January 2026, pp. 2–6. Reviewed 2026-09-09.
Ask for these before ordering
- Approved drawing for the exact model, size and configuration
- Serial-number calibration or factory test record
- Applicable approval certificate and exact scope
- Installation manual and required straight pipe
- Protocol/register map and output power requirements
- Option/accessory codes with included components
- Pressure-loss curve, flange drilling and face-to-face length
- Current written commercial and warranty terms
SPECIFY YOUR REQUIREMENT
Get a quotation for FM03 P
Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.
Compare related models
Similar technology does not mean equivalent performance. Compare exact configurations.