Established 1969 Hyderabad · supply across India040-27710537
Water meterMAHESH TRADING CORPORATIONWATER METERS & FLOW METERS
Menu

Buying guide · reviewed 9 September 2026

Technical details that matter before ordering

Practical selection guidance for engineers, buyers and facility managers.

Specification What to request What not to assume
Fluid Composition, conductivity, solids, air, treatment chemicals All water is equivalent
Flow Minimum/normal/continuous maximum/peak with units and duration Pipe DN determines measuring range
Accuracy Complete expression, flow band, temperature, orientation A percentage applies at every flow
Pressure Allowable working pressure at temperature; surge conditions Hydrostatic test pressure is working pressure
Temperature Fluid and ambient ranges, excursions, cleaning temperatures “Hot” in a filename proves a rating
Materials Body, liner, electrodes, seals and other wetted parts Housing material describes all wetted parts
Connections Thread type, flange standard/class/drilling, face-to-face length Same DN means bolts and lengths match
Orientation Approved direction and register position Every meter can be installed vertically
Straight pipe Model-specific upstream/downstream requirements and permitted disturbances One 5D/3D rule fits every technology
Ingress protection Sensor, transmitter, module and connector ratings; stated immersion conditions IP68 means unlimited depth, or covers the whole assembled system
Power Supply, consumption, backup, battery replacement and output limitations A battery powers every output continuously
Diagnostics Empty pipe, reverse flow, air, tamper and fault behavior Every alarm is available in every variant
Outputs Exact fitted interface, quantity, scaling and simultaneous availability “Optional” means included
Service Calibration/test options, spares, access and warranty scope A removable insert can be changed without further checks

Some designs permit very short or no straight runs under specified conditions; others need significant undisturbed pipe. For example, KROHNE identifies particular 0D/0D configurations in its range. That is a model claim, not permission to omit straight runs for all mag meters. KROHNE product range

Ready to discuss your requirement?

Send a model code, BOQ or a brief description of your application. Add technical details if you have them.

Prepare a quotation enquiry →

Call us about Technical details that matter before ordering: 98490 02060

Call 98490 02060Request quote →